Most GE ice maker and freezer repairs in Gig Harbor involve the same few systems: water supply and the inlet valve, the ice maker assembly, fans, the defrost system and the controls. Below are independent repair companies serving Gig Harbor, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Ice Maker Technicians, Gig Harbor WA
Within 30 miles of Gig Harbor there are 40 appliance repair companies in our data. Other nearby bases include Tacoma (12), Federal Way (6), and Bremerton (6). The farthest listed company is about 17 miles out. The closest is Renvoriq Appliance Repair Tacoma, about 7.1 miles away. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The 21 rated companies in range average 4.6 stars.
Companies are shown by relevance and distance from Gig Harbor. A mention does not mean manufacturer certification, so ask each company about its experience with your appliance.
| Name refrigeration work in their listing | 11 |
|---|---|
| Open on Saturdays (per listing) | 35 |
| Rated 4.5 stars or higher (10+ reviews) | 15 |
| Three nearest companies, miles away | 7.1, 7.2, 8.1 |
| Appliance repair companies in range (30 mi) | 60 |
| Refrigerator repair in their categories | 11 |
At the top of the Gig Harbor list: GE Monogram Repair Kirkland (31.7 miles away, based in Kirkland, 5.0 stars from 21 reviews, lists Saturday hours); HotWire Furnace, Air Conditioning & Appliance Repair Tacoma (10.7 miles away, based in Tacoma, 4.9 stars from 470 reviews, lists Saturday hours); Leon's Luxury repair & installation (12.7 miles away, based in Tacoma, 4.7 stars from 51 reviews); A&H Appliance and Home services (11.9 miles away, based in Federal Way, 4.9 stars from 35 reviews, lists Saturday hours).
GE Ice and Freezer Designs
Know which GE ice maker you have before you call: GE sells in-door ice maker, countertop nugget ice maker (ge profile opal), dual ice maker, and undercounter ice maker. Freezer styles include French door bottom-freezer refrigerator, top-freezer refrigerator, upright freezer, and chest freezer.
Know Your GE Ice Maker
What Makes GE Ice Maker Repairs Different
GE says the icemaker mold has to get down to about 16°F before a cycle will start, so a warm freezer slows or stops ice production. Source: GE Appliances - Refrigerator - Icemaker Not Producing Ice
On the Opal nugget ice maker, two small sensors at the ice chute entrance detect a full bin and tell the unit when to go into defrost, and they stop working properly when coated with scale. Source: GE Appliances - Opal Ice Maker - Cleaning the Sensor
What GE Says to Check First
- Freezer warm on the outside. GE says chest freezers shed heat through the cabinet and uprights have case heaters to stop sweating, so a warm exterior is normal if clearance is adequate. Source: GE Appliances - Warm Freezer Exterior
- Ice maker leaking. Unplug the refrigerator, then check the water line fittings, water valve, fill tube extension and defrost drain, and make sure the unit is level. Source: GE Appliances - Why is my ice maker leaking and dripping water?
Reading a GE Error Code
| Code | What it means |
|---|---|
| dE | The defrost system has not operated properly in the last 24 hours. Source: GE Appliances - Refrigerator Error, Fault or Function Codes |
| tF | Not a fault; shows that Turbo Freeze is active. Source: GE Appliances - Refrigerator Error, Fault or Function Codes |
| E and 8 | On an upright freezer control, the temperature sensor (thermistor) is shorted; needs service if a 30-second power reset doesn't clear it. Source: GE Appliances - Freezer Error, Fault or Function Codes |
When to Call for GE Ice Maker Repair
- Water dispenser works but the ice maker does not
- No ice at all, or only a few cubes a day
- An ice maker light or error code on the display
How an Ice Maker Service Call Usually Goes in Gig Harbor
Not sure it is a GE problem? The general pages cover every brand: ice maker repair in Gig Harbor and freezer repair in Gig Harbor.
Care GE Recommends
- GE suggests 0°F in the freezer and 37°F in the fresh food section for best ice production, lowering the setting one degree every 24 hours if output is low. Source: GE Appliances - Icemaker Troubleshooting Tips
- Clean an Opal's sensors with a cotton swab dampened with white vinegar, and run vinegar cleaning cycles followed by fresh-water rinses if hard water buildup persists. Source: GE Appliances - Opal Ice Maker - Cleaning the Sensor
Brand guides: GE Ice Maker Not Working: What to Check.
GE Repair Cost Ranges
Most GE ice maker and freezer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water line installation for an ice maker: $100–$200 Source: HomeGuide - How much does an ice maker cost to repair, replace, or buy new?
- Upright freezer repair: $50–$500 Source: Fixr - How much does it cost to repair a freezer?
- Typical freezer repair: $100–$400 Source: Fixr - How much does it cost to repair a freezer?
- Typical freezer repair: $100–$400 Source: Fixr - How much does it cost to repair a freezer?
- Diagnostic fee (often credited toward the repair): $60–$100 per visit Source: HomeAdvisor - How Much Does Refrigerator Repair Cost?
For a newer built-in ice maker, replacing just the failed motor may be the best option, while on some older units a motor costs about as much as a new ice maker. Source: Fixr - How much does it cost to repair an ice maker?
Ranges are published estimates, not quotes. See the ice maker repair cost guide for more detail.
Before the Technician Arrives
- Whether the water dispenser still works
- The brand, model and serial number from the label inside the fresh-food section
- When the water filter was last changed
Local Notes for Gig Harbor
Most ice maker calls in Gig Harbor come down to the same handful of causes: water supply and pressure, a frozen fill tube, the water inlet valve, freezer temperature and the ice maker assembly itself.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
How to Choose a Freezer and Ice Maker Technician Near Gig Harbor
- Can you get the ice maker assembly or valve for my model quickly?
- How often do you repair GE ice makers, including door-mounted ones?
- Do you also repair the water dispenser and supply line?
GE Ice Maker & Freezer Repair FAQs: Gig Harbor, WA
Is there a reset button on my ice maker?
Why is my GE refrigerator showing a code?
What causes heavy frost buildup?
Related Repair Pages for Gig Harbor
GE Ice Maker & Freezer Repair in Nearby Cities
Nearby Towns Served From Gig Harbor
The technicians listed for Gig Harbor also cover smaller towns nearby, including Maplewood. If you are in one of them, the companies above are your closest GE ice maker and freezer repair options, and our helpline covers you too.
Write down any code or light your GE display shows and when it appears. It helps a Gig Harbor technician bring the right parts.