Most GE ice maker and freezer repairs in Murray involve the same few systems: water supply and the inlet valve, the ice maker assembly, fans, the defrost system and the controls. Below are independent repair companies serving Murray, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Ice Maker Technicians, Murray UT
We found 40 appliance repair companies within 30 miles of Murray. 2 of them are based in Murray itself, and other nearby bases include Sandy (8), Midvale (6), and West Jordan (6). No company within 30 miles of Murray names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: Local Appliance Repair Technicians, around 0.7 miles out. The 23 rated companies in range average 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 0.7, 0.9, 1.7 |
|---|---|
| Listed as refrigerator repair | 12 |
| Open on Saturdays (per listing) | 42 |
| With 4.5+ stars and at least 10 reviews | 13 |
| Appliance repair companies in range (30 mi) | 60 |
| Name refrigeration work in their listing | 12 |
At the top of the Murray list: General Electric Appliance (7.4 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); PowerClean Appliance Repair (2.7 miles away, based in Midvale, 4.9 stars from 949 reviews, lists Saturday hours); Trusty Appliance Repair (3.6 miles away, based in Sandy, 4.9 stars from 313 reviews, lists Saturday hours); Eagle Appliance Repair (4.6 miles away, based in West Jordan, 4.9 stars from 204 reviews, lists Saturday hours).
GE Ice Makers and Freezers Technicians See
Know which GE ice maker you have before you call: GE sells in-door ice maker, dual ice maker, in-freezer ice maker, and fresh-food compartment ice maker. Freezer styles include side-by-side refrigerator, French door bottom-freezer refrigerator, upright freezer, and chest freezer.
GE Lines Technicians Work On
What Makes GE Ice Maker Repairs Different
On the Opal nugget ice maker, two small sensors at the ice chute entrance detect a full bin and tell the unit when to go into defrost, and they stop working properly when coated with scale. Source: GE Appliances - Opal Ice Maker - Cleaning the Sensor
Depending on the model, the ice maker can sit in the freezer, in the fresh food section or in the fresh food door, and daily output runs roughly 3 to 4.5 pounds by style. Source: GE Appliances - How much ice should I get in a day?
What GE Says to Check First
- Ice maker not making ice. First make sure the ice maker is turned on, then confirm the freezer is at 0°F and that clumped ice is not jamming the feeler arm. Source: GE Appliances - Icemaker Troubleshooting Tips
- Ice maker leaking. Unplug the refrigerator, then check the water line fittings, water valve, fill tube extension and defrost drain, and make sure the unit is level. Source: GE Appliances - Why is my ice maker leaking and dripping water?
GE Ice Maker and Freezer Codes
| Code | What it means |
|---|---|
| E and 9 | On an upright freezer control, the thermistor circuit is open; needs service if a 30-second power reset doesn't clear it. Source: GE Appliances - Freezer Error, Fault or Function Codes |
| tF | Not a fault; shows that Turbo Freeze is active. Source: GE Appliances - Refrigerator Error, Fault or Function Codes |
| dE | The defrost system has not operated properly in the last 24 hours. Source: GE Appliances - Refrigerator Error, Fault or Function Codes |
GE Freezer Problems Worth a Service Call
- Heavy frost on the back wall or around the door
- An error code or temperature alarm
- Door or lid does not seal or pops back open
Inside an Ice Maker Repair Visit
Compare with technicians who work on every brand: ice maker repair in Murray and freezer repair in Murray.
Care GE Recommends
- GE suggests 0°F in the freezer and 37°F in the fresh food section for best ice production, lowering the setting one degree every 24 hours if output is low. Source: GE Appliances - Icemaker Troubleshooting Tips
- Change the water filter every six months, sooner after new construction, and run about two gallons through the dispenser after a change to purge air. Source: GE Appliances - Refrigerator - Hollow, Mushy, or Small Ice Cubes
Brand guides: GE Ice Maker Not Working: What to Check.
GE Repair Cost Ranges
Most GE ice maker and freezer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Compressor replacement: $400–$800 Source: HomeGuide - How much does freezer repair cost?
- Refrigerant recharge (regassing): $200–$400 Source: HomeGuide - How much does freezer repair cost?
- Water filter replacement (professional): $85–$250 Source: Fixr - How much does it cost to repair an ice maker?
- Water line installation for an ice maker: $100–$200 Source: HomeGuide - How much does an ice maker cost to repair, replace, or buy new?
- Technician labor: $100–$250 per hour Source: Fixr - How much does it cost to repair a refrigerator?
For a newer built-in ice maker, replacing just the failed motor may be the best option, while on some older units a motor costs about as much as a new ice maker. Source: Fixr - How much does it cost to repair an ice maker?
Ranges are published estimates, not quotes. See the ice maker repair cost guide for more detail.
Before the Technician Arrives
- Whether the ice maker is in the door, in the freezer or both
- The freezer temperature if you have a thermometer
- When the water filter was last changed
Freezer and Ice Maker Notes for Murray, UT
Most ice maker calls in Murray come down to the same handful of causes: water supply and pressure, a frozen fill tube, the water inlet valve, freezer temperature and the ice maker assembly itself.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Murray Repair Technician
- Is your company licensed where my state requires it, and insured?
- Do you also repair the water dispenser and supply line?
- Will you check the water supply, filter and inlet valve before replacing the ice maker?
GE Ice Maker & Freezer Repair FAQs: Murray, UT
Do you repair GE standalone freezers too?
What causes heavy frost buildup?
Which Murray technicians work on GE?
Is this GE customer service?
Other Refrigeration Repair in Murray
GE Ice Maker & Freezer Repair in Nearby Cities
Note whether the water dispenser still works and what temperature the freezer holds. It tells a Murray technician whether to look at water supply, cold air or the GE ice maker itself.