Most GE ice maker and freezer repairs in Draper involve the same few systems: water supply and the inlet valve, the ice maker assembly, fans, the defrost system and the controls. Below are independent repair companies serving Draper, with those that mention GE first, then the nearest appliance repair companies.
Freezer Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE ice makers and freezers along with other brands.
Who Works on GE Ice Makers Near Draper
We found 40 appliance repair companies within 30 miles of Draper. 5 list an address in Draper, and other nearby bases include Sandy (14), Riverton (5), and Lehi (5). The farthest listed company is about 8 miles out. The closest is SterlingCare Appliance Repair Draper, about 1.5 miles away. No company within 30 miles of Draper names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 20 rated companies in range average 4.9 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Distance to the three closest (mi) | 1.5, 1.5, 1.9 |
|---|---|
| Repair companies inside 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 9 |
| Refrigerator repair in their categories | 7 |
| Mention refrigerators, freezers or ice makers | 8 |
| Open on Saturdays (per listing) | 40 |
Closest matches for Draper: General Electric Appliance (18.1 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); Appliance Man (6.5 miles away, based in Sandy, 4.7 stars from 424 reviews, lists Saturday hours); Trusty Appliance Repair (7.4 miles away, based in Sandy, 4.9 stars from 313 reviews, lists Saturday hours); Famous Appliance Service (7.6 miles away, based in Midvale, 4.6 stars from 805 reviews).
Which GE Ice Maker Do You Have?
Know which GE ice maker you have before you call: GE sells dual ice maker, countertop nugget ice maker (ge profile opal), undercounter ice maker, and in-door ice maker. On the freezer side, GE sells chest freezer, side-by-side refrigerator, French door bottom-freezer refrigerator, and upright freezer.
Know Your GE Ice Maker
What a GE Technician Deals With
Depending on the model, the ice maker can sit in the freezer, in the fresh food section or in the fresh food door, and daily output runs roughly 3 to 4.5 pounds by style. Source: GE Appliances - How much ice should I get in a day?
The icemaker fills from the rear while its thermostat sits at the front cube, so a slow fill or a freezer colder than about -10°F can eject the rear cubes before they are solid and leave them hollow. Source: GE Appliances - Refrigerator - Hollow, Mushy, or Small Ice Cubes
What GE Says to Check First
- Opal nugget ice maker low or no ice. A blocked ice chute can give a false full-bin signal, so clean the Opal per the manual and make sure the bin is fully inserted. Source: GE Appliances - Opal Ice Maker - Troubleshooting
- Ice maker not making ice. First make sure the ice maker is turned on, then confirm the freezer is at 0°F and that clumped ice is not jamming the feeler arm. Source: GE Appliances - Icemaker Troubleshooting Tips
What GE Ice and Freezer Codes Mean
| Code | What it means |
|---|---|
| dE | The defrost system has not operated properly in the last 24 hours. Source: GE Appliances - Refrigerator Error, Fault or Function Codes |
| E and 8 | On an upright freezer control, the temperature sensor (thermistor) is shorted; needs service if a 30-second power reset doesn't clear it. Source: GE Appliances - Freezer Error, Fault or Function Codes |
| E and 7 | On an upright freezer control, a button has been held in for more than 30 seconds. Source: GE Appliances - Freezer Error, Fault or Function Codes |
Signs Your GE Ice Maker Needs a Technician
- Ice will not dispense even though the bucket is full
- Ice maker clicks or hums but does not fill
- Ice clumping in the bucket
What Gets Fixed on a Draper Freezer Call
Not sure it is a GE problem? The general pages cover every brand: ice maker repair in Draper and freezer repair in Draper.
Care GE Recommends
- Change the water filter every six months, sooner after new construction, and run about two gallons through the dispenser after a change to purge air. Source: GE Appliances - Refrigerator - Hollow, Mushy, or Small Ice Cubes
- Clean an Opal's sensors with a cotton swab dampened with white vinegar, and run vinegar cleaning cycles followed by fresh-water rinses if hard water buildup persists. Source: GE Appliances - Opal Ice Maker - Cleaning the Sensor
Brand guides: GE Ice Maker Not Working: What to Check.
GE Repair Cost Ranges
Price the repair before replacing a GE refrigerator or freezer. Published ranges for common jobs:
- Water line installation for an ice maker: $100–$200 Source: HomeGuide - How much does an ice maker cost to repair, replace, or buy new?
- Evaporator fan motor (defrost motor): $100–$440 Source: ConsumerAffairs - Cost to Repair a Freezer
- Compressor replacement: $400–$800 Source: HomeGuide - How much does freezer repair cost?
- Deep freezer repair: $100–$400 Source: HomeGuide - How much does freezer repair cost?
- Typical ice maker repair: $150–$250 Source: Fixr - How much does it cost to repair an ice maker?
- Diagnostic fee (often waived if the repair is approved): $60–$100 per visit Source: Thumbtack - Refrigerator repair cost
For a newer built-in ice maker, replacing just the failed motor may be the best option, while on some older units a motor costs about as much as a new ice maker. Source: Fixr - How much does it cost to repair an ice maker?
Ranges are published estimates, not quotes. See the ice maker repair cost guide for more detail.
What to Have Ready for a GE Call
- Whether the water dispenser still works
- When the water filter was last changed
- Any light, code or message on the display
What Draper Owners Should Know
Most ice maker calls in Draper come down to the same handful of causes: water supply and pressure, a frozen fill tube, the water inlet valve, freezer temperature and the ice maker assembly itself.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Draper Repair Technician
- Will you check the water supply, filter and inlet valve before replacing the ice maker?
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
GE Ice Maker & Freezer Repair FAQs: Draper, UT
How do I reset my ice maker?
Why is my GE refrigerator showing a code?
Why is there so much frost in my freezer?
More Freezer and Ice Maker Repair in Draper, UT
GE Ice Maker & Freezer Repair in Nearby Cities
Write down any code or light your GE display shows and when it appears. It helps a Draper technician bring the right parts.