A GE ice maker shares its basic needs with every other ice maker, cold air, water and a working mechanism, but where it sits, how it is reset and the codes it shows are specific to the brand and model. The Duncan list starts with companies that name GE, followed by other appliance repair companies that work on ice makers and freezers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Ice Maker Technicians, Duncan OK
19 repair companies serve Duncan from within 60 miles. 1 of them are based in Duncan itself, and other nearby bases include Ardmore (4), Norman (4), and Wichita Falls (3). Distances run up to about 59 miles. Nearest on the list: Sears Appliance Repair, around 2.8 miles out. No company within 90 miles of Duncan mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.6 stars across 18 businesses. Because the nearest shops are farther out, ask each company whether Duncan is inside its regular service area.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Repair companies inside 60 miles | 19 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 10 |
| Listed as refrigerator repair | 8 |
| Mention refrigerators, freezers or ice makers | 8 |
| Three nearest companies, miles away | 2.8, 26.6, 43.1 |
| Listing Saturday hours | 11 |
The leading options for Duncan are Sears Appliance Repair (2.8 miles away, 4.2 stars from 52 reviews, lists Saturday hours); Sears Appliance Repair (52.8 miles away, based in Norman, 4.5 stars from 149 reviews, lists Saturday hours); Adam's Appliance Repair, Inc (55.8 miles away, based in Norman, 5.0 stars from 462 reviews, lists Saturday hours); Mr. Appliance of Wichita Falls (54.5 miles away, based in Wichita Falls, 4.8 stars from 186 reviews, lists Saturday hours).
GE Ice Makers and Freezers Technicians See
Know which GE ice maker you have before you call: GE sells undercounter ice maker, countertop nugget ice maker (ge profile opal), dual ice maker, and fresh-food compartment ice maker. Freezer styles include chest freezer, side-by-side refrigerator, upright freezer, and top-freezer refrigerator.
Know Your GE Ice Maker
What a GE Technician Deals With
GE says the icemaker mold has to get down to about 16°F before a cycle will start, so a warm freezer slows or stops ice production. Source: GE Appliances - Refrigerator - Icemaker Not Producing Ice
On the Opal nugget ice maker, two small sensors at the ice chute entrance detect a full bin and tell the unit when to go into defrost, and they stop working properly when coated with scale. Source: GE Appliances - Opal Ice Maker - Cleaning the Sensor
Common GE Ice Maker and Freezer Problems
- Ice maker not making ice. First make sure the ice maker is turned on, then confirm the freezer is at 0°F and that clumped ice is not jamming the feeler arm. Source: GE Appliances - Icemaker Troubleshooting Tips
- Freezer not freezing. On an upright or chest freezer whose lights work but won't cool, GE says to confirm the control isn't set to OFF before scheduling repair. Source: GE Appliances - Upright & Chest Freezer - Not Working
GE Ice Maker and Freezer Codes
| Code | What it means |
|---|---|
| dE | The defrost system has not operated properly in the last 24 hours. Source: GE Appliances - Refrigerator Error, Fault or Function Codes |
| FF | Freezer temperature has risen too high; check frozen food for thawing. Source: GE Appliances - Refrigerator Error, Fault or Function Codes |
| E and 8 | On an upright freezer control, the temperature sensor (thermistor) is shorted; needs service if a 30-second power reset doesn't clear it. Source: GE Appliances - Freezer Error, Fault or Function Codes |
GE Freezer Problems Worth a Service Call
- Freezer runs constantly but stays warm
- Door or lid does not seal or pops back open
- Chest freezer exterior feels hot to the touch for a long time
Inside a Freezer Repair Visit
More local options for any brand: ice maker repair in Duncan and freezer repair in Duncan.
Care GE Recommends
- Keeping the freezer about three-quarters full helps the ice maker run efficiently and hold temperature. Source: GE Appliances - How much ice should I get in a day?
- Change the water filter every six months, sooner after new construction, and run about two gallons through the dispenser after a change to purge air. Source: GE Appliances - Refrigerator - Hollow, Mushy, or Small Ice Cubes
Brand guides: GE Ice Maker Not Working: What to Check.
What GE Ice Maker and Freezer Repairs Cost
Most GE ice maker and freezer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water dispenser repair: $170–$500 Source: Fixr - How much does it cost to repair a refrigerator?
- Replace ice maker in refrigerator (parts and labor): $250–$600 Source: HomeGuide - How much does an ice maker cost to repair, replace, or buy new?
- Fan replacement (evaporator or condenser): $100–$300 Source: HomeGuide - How much does freezer repair cost?
- Typical freezer repair: $135–$353 Source: Thumbtack - How much do freezer repairs cost?
- Technician labor: $100–$250 per hour Source: Fixr - How much does it cost to repair a refrigerator?
Repair a freezer under ten years old when the repair costs less than half the price of a new one; near ten years old, consider replacing. Source: Fixr - How much does it cost to repair a freezer?
Ranges are published estimates, not quotes. See the ice maker repair cost guide for more detail.
Before the Technician Arrives
- Whether the ice maker is in the door, in the freezer or both
- When the water filter was last changed
- The brand, model and serial number from the label inside the fresh-food section
Around Duncan
Most ice maker calls in Duncan come down to the same handful of causes: water supply and pressure, a frozen fill tube, the water inlet valve, freezer temperature and the ice maker assembly itself.
Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)
In Oklahoma, you can check a license with the Oklahoma Construction Industries Board Licensee Search or report a problem to the Oklahoma Attorney General, Consumer Protection Unit.
Questions to Ask a Duncan Repair Technician
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
- Can you get the ice maker assembly or valve for my model quickly?
GE Ice Maker & Freezer Repair FAQs: Duncan, OK
Why is my ice maker making tiny cubes?
Why is there so much frost in my freezer?
Do you work for GE?
Related Repair Pages for Duncan
GE Ice Maker & Freezer Repair in Nearby Cities
Note whether the water dispenser still works and what temperature the freezer holds. It tells a Duncan technician whether to look at water supply, cold air or the GE ice maker itself.