A GE ice maker shares its basic needs with every other ice maker, cold air, water and a working mechanism, but where it sits, how it is reset and the codes it shows are specific to the brand and model. We flag companies whose listing or website mentions GE and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Ice Maker Technicians, Milford Mill MD
We found 40 appliance repair companies within 30 miles of Milford Mill. Other nearby bases include Baltimore (17), Columbia (4), and Randallstown (3). The closest is Crown Appliance Co, about 0.9 miles away. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Rated companies nearby average 4.5 stars across 36 businesses.
Companies are shown by relevance and distance from Milford Mill. A mention does not mean manufacturer certification, so ask each company about its experience with your appliance.
| Open on Saturdays (per listing) | 38 |
|---|---|
| Distance to the three closest (mi) | 0.9, 1.7, 2.4 |
| Name refrigeration work in their listing | 20 |
| Repair companies inside 30 miles | 60 |
| Listed as refrigerator repair | 17 |
| Rated 4.5 stars or higher (10+ reviews) | 22 |
First up for Milford Mill: District-Columbia Hotpoint Rpr (34.1 miles away, based in Washington, 5.0 stars from 4 reviews, lists Saturday hours); Mr. Appliance of Howard County (5.5 miles away, based in Ellicott City, 4.7 stars from 1,049 reviews, lists Saturday hours); All-Star Appliance Repair Baltimore (6.2 miles away, based in Baltimore, 4.7 stars from 1,459 reviews, lists Saturday hours); NT Appliances Repair Service (2.5 miles away, based in Randallstown, 4.9 stars from 83 reviews, lists Saturday hours).
Know Your GE Ice Maker
What Makes GE Ice Maker Repairs Different
Common leak points GE lists for the ice maker are loose water line fittings, a leaking water valve, a leaking fill tube extension and a clogged defrost drain. Source: GE Appliances - Why is my ice maker leaking and dripping water?
GE says the icemaker mold has to get down to about 16°F before a cycle will start, so a warm freezer slows or stops ice production. Source: GE Appliances - Refrigerator - Icemaker Not Producing Ice
GE Symptoms and First Checks
- Ice maker leaking. Unplug the refrigerator, then check the water line fittings, water valve, fill tube extension and defrost drain, and make sure the unit is level. Source: GE Appliances - Why is my ice maker leaking and dripping water?
- Ice maker frozen / ice buildup. If cubes jam the ejector rake the cycle can't finish, so clear the ice carefully because the mold may be hot. Source: GE Appliances - Refrigerator - Icemaker Not Producing Ice
GE Ice Maker and Freezer Codes
| Code | What it means |
|---|---|
| E and 8 | On an upright freezer control, the temperature sensor (thermistor) is shorted; needs service if a 30-second power reset doesn't clear it. Source: GE Appliances - Freezer Error, Fault or Function Codes |
| E and 7 | On an upright freezer control, a button has been held in for more than 30 seconds. Source: GE Appliances - Freezer Error, Fault or Function Codes |
| tF | Not a fault; shows that Turbo Freeze is active. Source: GE Appliances - Refrigerator Error, Fault or Function Codes |
GE Freezer Problems Worth a Service Call
- Door or lid does not seal or pops back open
- Freezer runs constantly but stays warm
- Freezer is too cold and freezing everything solid
Inside an Ice Maker Repair Visit
Not sure it is a GE problem? The general pages cover every brand: ice maker repair in Milford Mill and freezer repair in Milford Mill.
Owner Care for GE Ice Makers
- Clean an Opal's sensors with a cotton swab dampened with white vinegar, and run vinegar cleaning cycles followed by fresh-water rinses if hard water buildup persists. Source: GE Appliances - Opal Ice Maker - Cleaning the Sensor
- GE suggests 0°F in the freezer and 37°F in the fresh food section for best ice production, lowering the setting one degree every 24 hours if output is low. Source: GE Appliances - Icemaker Troubleshooting Tips
Brand guides: GE Ice Maker Not Working: What to Check.
GE Repair Cost Ranges
Most GE ice maker and freezer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Fan replacement (evaporator or condenser): $100–$300 Source: HomeGuide - How much does freezer repair cost?
- Defrost heater: $150–$350 Source: HomeGuide - How much does freezer repair cost?
- Chest freezer repair: $50–$400 Source: Fixr - How much does it cost to repair a freezer?
- Water inlet valve: $100–$225 Source: HomeGuide - How much does an ice maker cost to repair, replace, or buy new?
- Typical freezer repair: $135–$353 Source: Thumbtack - How much do freezer repairs cost?
- Diagnostic fee (often waived if the repair is approved): $60–$100 per visit Source: Thumbtack - Refrigerator repair cost
When several freezer parts have failed at once, replacement is usually the more cost-efficient choice. Source: HomeGuide - How much does freezer repair cost?
Ranges are published estimates, not quotes. See the ice maker repair cost guide for more detail.
Before the Technician Arrives
- The freezer temperature if you have a thermometer
- When the water filter was last changed
- Any light, code or message on the display
Around Milford Mill
Most ice maker calls in Milford Mill come down to the same handful of causes: water supply and pressure, a frozen fill tube, the water inlet valve, freezer temperature and the ice maker assembly itself.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
Hiring a Repair Company in Milford Mill
- Can you get the ice maker assembly or valve for my model quickly?
- How often do you repair GE ice makers, including door-mounted ones?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Ice Maker & Freezer Repair FAQs: Milford Mill, MD
Can the same technician fix my GE chest or upright freezer?
How do I reset my ice maker?
Which Milford Mill technicians work on GE?
Is this GE customer service?
Related Repair Pages for Milford Mill
GE Ice Maker & Freezer Repair in Nearby Cities
Before you call, find the model and serial number on your GE refrigerator or freezer, usually on a label inside the fresh-food section or the freezer door frame. A technician who knows the model can often tell you on the phone what the first visit will involve.