If your GE ice maker has stopped making ice, the ice compartment has frozen over or the freezer is running warm, the technician you call should know the model line. The Burley list starts with companies that name GE, followed by other appliance repair companies that work on ice makers and freezers.
Freezer Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE ice makers and freezers along with other brands.
Who Works on GE Ice Makers Near Burley
Our data shows 5 appliance repair companies inside a 60-mile radius of Burley. Other nearby bases include Twin Falls (3), Rupert (1), and American Falls (1). The farthest listed company is about 51 miles out. Doyle's Appliance Service LLC is the nearest, roughly 5.4 miles from Burley. None of the repair companies near Burley name GE in their listings, so we show the closest appliance repair companies. Ask each one about your appliance before booking. Across 5 rated companies, the average public rating is 4.3 stars. Burley is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 3 |
|---|---|
| Open on Saturdays (per listing) | 2 |
| Mention refrigerators, freezers or ice makers | 1 |
| Distance to the three closest (mi) | 5.4, 31.9, 33.7 |
| Companies within 60 miles | 5 |
Closest matches for Burley: Doyle's Appliance Service LLC (5.4 miles away, based in Rupert, 4.8 stars from 55 reviews); Pro-Tech Service (33.7 miles away, based in Twin Falls, 4.4 stars from 138 reviews); Wilder Appliance (34.8 miles away, based in Twin Falls, 4.9 stars from 30 reviews); Hartman's Appliance Repair. (31.9 miles away, based in Twin Falls, 4.7 stars from 83 reviews, lists Saturday hours).
GE Ice and Freezer Designs
Know which GE ice maker you have before you call: GE sells countertop nugget ice maker (ge profile opal), undercounter ice maker, in-freezer ice maker, and in-door ice maker. Freezer styles include French door bottom-freezer refrigerator, upright freezer, side-by-side refrigerator, and top-freezer refrigerator.
GE Lines Technicians Work On
What Makes GE Ice Maker Repairs Different
GE says the icemaker mold has to get down to about 16°F before a cycle will start, so a warm freezer slows or stops ice production. Source: GE Appliances - Refrigerator - Icemaker Not Producing Ice
The icemaker fills from the rear while its thermostat sits at the front cube, so a slow fill or a freezer colder than about -10°F can eject the rear cubes before they are solid and leave them hollow. Source: GE Appliances - Refrigerator - Hollow, Mushy, or Small Ice Cubes
What GE Says to Check First
- Opal nugget ice maker low or no ice. A blocked ice chute can give a false full-bin signal, so clean the Opal per the manual and make sure the bin is fully inserted. Source: GE Appliances - Opal Ice Maker - Troubleshooting
- Ice maker frozen / ice buildup. If cubes jam the ejector rake the cycle can't finish, so clear the ice carefully because the mold may be hot. Source: GE Appliances - Refrigerator - Icemaker Not Producing Ice
Reading a GE Error Code
| Code | What it means |
|---|---|
| dE | The defrost system has not operated properly in the last 24 hours. Source: GE Appliances - Refrigerator Error, Fault or Function Codes |
| tF | Not a fault; shows that Turbo Freeze is active. Source: GE Appliances - Refrigerator Error, Fault or Function Codes |
| E and 8 | On an upright freezer control, the temperature sensor (thermistor) is shorted; needs service if a 30-second power reset doesn't clear it. Source: GE Appliances - Freezer Error, Fault or Function Codes |
GE Freezer Problems Worth a Service Call
- Water pooling under or inside the freezer
- Clicking, buzzing or a loud fan
- Heavy frost on the back wall or around the door
What a Freezer Technician Checks
Not sure it is a GE problem? The general pages cover every brand: ice maker repair in Burley and freezer repair in Burley.
Care GE Recommends
- Clean an Opal's sensors with a cotton swab dampened with white vinegar, and run vinegar cleaning cycles followed by fresh-water rinses if hard water buildup persists. Source: GE Appliances - Opal Ice Maker - Cleaning the Sensor
- GE suggests 0°F in the freezer and 37°F in the fresh food section for best ice production, lowering the setting one degree every 24 hours if output is low. Source: GE Appliances - Icemaker Troubleshooting Tips
Brand guides: GE Ice Maker Not Working: What to Check.
What GE Ice Maker and Freezer Repairs Cost
A GE ice maker or freezer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive blade replacement (dispenser-related problems): $80–$150 Source: HomeGuide - How much does an ice maker cost to repair, replace, or buy new?
- Typical freezer repair: $100–$400 Source: Fixr - How much does it cost to repair a freezer?
- Compressor replacement: $400–$800 Source: HomeGuide - How much does freezer repair cost?
- Control board replacement: $300–$650 Source: Fixr - How much does it cost to repair a freezer?
- Typical freezer repair: $250–$500 Source: ConsumerAffairs - Cost to Repair a Freezer
- Diagnostic fee (often credited toward the repair): $60–$100 per visit Source: HomeAdvisor - How Much Does Refrigerator Repair Cost?
Repair a freezer under ten years old when the repair costs less than half the price of a new one; near ten years old, consider replacing. Source: Fixr - How much does it cost to repair a freezer?
Ranges are published estimates, not quotes. See the ice maker repair cost guide for more detail.
What to Have Ready for a GE Call
- When the water filter was last changed
- Any light, code or message on the display
- Whether the water dispenser still works
Around Burley
Most ice maker calls in Burley come down to the same handful of causes: water supply and pressure, a frozen fill tube, the water inlet valve, freezer temperature and the ice maker assembly itself.
Idaho's Division of Occupational and Professional Licenses does not list appliance repair as a licensed profession; gas piping and gas appliance work falls under the state's HVAC licensing, which includes specialty licenses for those trades. Source: Is My Profession Licensed? - Idaho DOPL
In Idaho, you can check a license with the Idaho DOPL Search for a License or Registration or report a problem to the Idaho Attorney General Consumer Protection Division.
Hiring a Repair Company in Burley
- Will you check the water supply, filter and inlet valve before replacing the ice maker?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you give a written estimate before ordering parts?
GE Ice Maker & Freezer Repair FAQs: Burley, ID
What causes heavy frost buildup?
Why is my ice maker making tiny cubes?
Is there a reset button on my ice maker?
Related Repair Pages for Burley
More GE Ice Maker & Freezer Repair Pages Nearby
GE Ice Maker & Freezer Repair for Towns Near Burley
GE ice maker and freezer repair for Rupert is handled by the same companies listed for Burley. Each town also has its own freezer repair page with the nearest companies:
Write down any code or light your GE display shows and when it appears. It helps a Burley technician bring the right parts.