Most GE ice maker and freezer repairs in Port Charlotte involve the same few systems: water supply and the inlet valve, the ice maker assembly, fans, the defrost system and the controls. Below are independent repair companies serving Port Charlotte, with those that mention GE first, then the nearest appliance repair companies.
Independent listings only: Freezer Repair Near Me is not affiliated with or endorsed by GE. If your appliance is still under manufacturer coverage, contact GE directly.
Who Works on GE Ice Makers Near Port Charlotte
We found 40 appliance repair companies within 30 miles of Port Charlotte. 4 of them are based in Port Charlotte itself, and the rest are spread across Englewood (11), North Port (9), and Venice (8). The farthest listed company is about 21 miles out. None of the repair companies near Port Charlotte name GE in their listings, so we show the closest appliance repair companies. Ask each one about your appliance before booking. Bruno's Appliance Repair & Sales is the nearest, roughly 0.4 miles from Port Charlotte. The 34 rated companies in range average 4.9 stars.
Companies are shown by relevance and distance from Port Charlotte. A mention does not mean manufacturer certification, so ask each company about its experience with your appliance.
| Companies within 30 miles | 60 |
|---|---|
| Name refrigeration work in their listing | 19 |
| Refrigerator repair in their categories | 19 |
| Listing Saturday hours | 39 |
| Distance to the three closest (mi) | 0.4, 0.8, 2.6 |
| Rated 4.5 stars or higher (10+ reviews) | 19 |
First up for Port Charlotte: Mr. Appliance of Charlotte, Desoto & Southern Sarasota (4.6 miles away, based in Punta Gorda, 4.8 stars from 1,025 reviews, lists Saturday hours); Grande Aire Services Inc. (13.1 miles away, based in Englewood, 4.9 stars from 786 reviews, lists Saturday hours); Service Doctor (2.6 miles away, 4.9 stars from 75 reviews); Bruno's Appliance Repair & Sales (0.4 miles away, 4.9 stars from 157 reviews).
Which GE Ice Maker Do You Have?
GE ice makers come in several designs, including countertop nugget ice maker (ge profile opal), dual ice maker, in-freezer ice maker, and in-door ice maker, and each one fails in its own way. Freezer styles include top-freezer refrigerator, chest freezer, side-by-side refrigerator, and French door bottom-freezer refrigerator.
Know Your GE Ice Maker
What a GE Technician Deals With
Common leak points GE lists for the ice maker are loose water line fittings, a leaking water valve, a leaking fill tube extension and a clogged defrost drain. Source: GE Appliances - Why is my ice maker leaking and dripping water?
The icemaker fills from the rear while its thermostat sits at the front cube, so a slow fill or a freezer colder than about -10°F can eject the rear cubes before they are solid and leave them hollow. Source: GE Appliances - Refrigerator - Hollow, Mushy, or Small Ice Cubes
GE Symptoms and First Checks
- Ice maker leaking. Unplug the refrigerator, then check the water line fittings, water valve, fill tube extension and defrost drain, and make sure the unit is level. Source: GE Appliances - Why is my ice maker leaking and dripping water?
- Freezer warm on the outside. GE says chest freezers shed heat through the cabinet and uprights have case heaters to stop sweating, so a warm exterior is normal if clearance is adequate. Source: GE Appliances - Warm Freezer Exterior
GE Ice Maker and Freezer Codes
| Code | What it means |
|---|---|
| E and 7 | On an upright freezer control, a button has been held in for more than 30 seconds. Source: GE Appliances - Freezer Error, Fault or Function Codes |
| E and 8 | On an upright freezer control, the temperature sensor (thermistor) is shorted; needs service if a 30-second power reset doesn't clear it. Source: GE Appliances - Freezer Error, Fault or Function Codes |
| E and 9 | On an upright freezer control, the thermistor circuit is open; needs service if a 30-second power reset doesn't clear it. Source: GE Appliances - Freezer Error, Fault or Function Codes |
Signs Your GE Ice Maker Needs a Technician
- No ice at all, or only a few cubes a day
- Water dispenser works but the ice maker does not
- Ice clumping in the bucket
What an Ice Maker Technician Checks
Compare with technicians who work on every brand: ice maker repair in Port Charlotte and freezer repair in Port Charlotte.
Keeping a GE Ice Maker and Freezer Running
- Change the water filter every six months, sooner after new construction, and run about two gallons through the dispenser after a change to purge air. Source: GE Appliances - Refrigerator - Hollow, Mushy, or Small Ice Cubes
- Clean an Opal's sensors with a cotton swab dampened with white vinegar, and run vinegar cleaning cycles followed by fresh-water rinses if hard water buildup persists. Source: GE Appliances - Opal Ice Maker - Cleaning the Sensor
Brand guides: GE Ice Maker Not Working: What to Check.
GE Repair Cost Ranges
A GE ice maker or freezer repair usually costs about the same as any other brand for the same part. Published ranges:
- Deep freezer repair: $100–$400 Source: HomeGuide - How much does freezer repair cost?
- Evaporator fan motor (defrost motor): $100–$440 Source: ConsumerAffairs - Cost to Repair a Freezer
- Defrost timer: $100–$225 Source: HomeGuide - How much does freezer repair cost?
- Typical ice maker repair: $150–$250 Source: Fixr - How much does it cost to repair an ice maker?
- Appliance repair labor: $50–$125 per hour Source: HomeGuide - How much does freezer repair cost?
For a newer built-in ice maker, replacing just the failed motor may be the best option, while on some older units a motor costs about as much as a new ice maker. Source: Fixr - How much does it cost to repair an ice maker?
Ranges are published estimates, not quotes. See the ice maker repair cost guide for more detail.
Getting Ready for the Repair
- Any light, code or message on the display
- When the water filter was last changed
- Whether the water dispenser still works
Freezer and Ice Maker Notes for Port Charlotte, FL
Most ice maker calls in Port Charlotte come down to the same handful of causes: water supply and pressure, a frozen fill tube, the water inlet valve, freezer temperature and the ice maker assembly itself.
Florida's construction licensing guidance says that paid work such as installing a dishwasher connected to drinking water or replacing a water heater requires a licensed contractor, and that a local business tax receipt or certificate of competency may also apply; it does not describe a separate state appliance repair license. Source: DBPR License Requirements and Exemptions (Construction Industry Licensing Board), posted by Columbia County
In Florida, you can check a license with the DBPR Verify a License (MyFloridaLicense.com) or report a problem to the Florida Attorney General, Office of Citizen Services / Consumer Protection.
How to Choose a Freezer and Ice Maker Technician Near Port Charlotte
- What guarantee do you give on parts and labor?
- Can you give a written estimate before ordering parts?
- How often do you repair GE ice makers, including door-mounted ones?
GE Ice Maker & Freezer Repair FAQs: Port Charlotte, FL
Why are my ice cubes small or hollow?
Do you work for GE?
Is my GE ice maker worth repairing?
Related Repair Pages for Port Charlotte
More GE Ice Maker & Freezer Repair Pages Nearby
Before you call, find the model and serial number on your GE refrigerator or freezer, usually on a label inside the fresh-food section or the freezer door frame. A technician who knows the model can often tell you on the phone what the first visit will involve.