Maytag Ice Maker & Freezer Repair in Clinton, TN

A Maytag ice maker shares its basic needs with every other ice maker, cold air, water and a working mechanism, but where it sits, how it is reset and the codes it shows are specific to the brand and model. The Clinton list starts with companies that name Maytag, followed by other appliance repair companies that work on ice makers and freezers.

This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.

Independent Maytag Ice Maker Technicians, Clinton TN

Within 30 miles of Clinton there are 36 appliance repair companies in our data. 1 of them are based in Clinton itself, and the rest are spread across Knoxville (20), Lenoir City (3), and Maryville (3). Distances run up to about 28 miles. Nearest on the list: G E Appliance Services, around 0.4 miles out. None of the repair companies near Clinton name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your appliance before booking. Rated companies nearby average 4.4 stars across 34 businesses.

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Closest matches for Clinton: Mr. Appliance of Knoxville (12.5 miles away, based in Knoxville, 4.6 stars from 1,973 reviews); ProTech Appliance Repair, Inc. (12.7 miles away, based in Knoxville, 4.9 stars from 270 reviews, lists Saturday hours); Sears Appliance Repair (14.9 miles away, based in Knoxville, 4.5 stars from 94 reviews, lists Saturday hours); Pattersons Home Appliances (14.0 miles away, based in Knoxville, 4.2 stars from 202 reviews, lists Saturday hours).

Maytag Ice and Freezer Features

What a Maytag Technician Deals With

Maytag says the ice maker's water valve needs at least 20 psi to work, with a healthy supply running roughly 30 to 120 psi, and that kinks, clogs or a filter older than six months can starve it of water. Source: Maytag - Ice Maker Troubleshooting

Maytag Symptoms and First Checks

• Frost buildup in freezer. Inspect and clean the door seals, avoid warm or uncovered food and frequent door openings, and defrost once frost is about 1/4 inch thick. Source: Maytag Product Help - How to Avoid Frost Build Up
• Ice maker frozen / ice buildup. Pull the ice bin and chip away built-up ice with a plastic knife, or defrost the freezer if the buildup is too large, and check for a frozen or kinked water line. Source: Maytag - Ice Maker Troubleshooting

The Maytag Ice Maker Test

Maytag says to press and hold the ice maker's reset button for a few seconds if the model has one, or otherwise unplug the refrigerator for one minute, then allow a couple of hours before checking for ice. Source: Maytag Product Help - Not Making Ice - Refrigerator

When to Call for Maytag Ice Maker Repair

• Ice tastes or smells off
• Ice will not dispense even though the bucket is full
• Small, hollow or misshapen cubes

What a Freezer Technician Checks

Compare with technicians who work on every brand: ice maker repair in Clinton and freezer repair in Clinton.

Care Maytag Recommends

• Keep the freezer at about 0°F; Maytag says the ice maker stops producing above about 5°F, and a setting that is far too low can freeze water before it reaches the mold. Source: Maytag - Ice Maker Troubleshooting
• Replace the water filter about every six months or when the indicator light comes on, make sure it is locked in and sealed, and flush the water system after a change. Source: Maytag Product Help - How to Troubleshoot the Ice Maker

Maytag Repair Cost Ranges

Most Maytag ice maker and freezer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:

• Control board replacement: $300–$650 Source: Fixr - How much does it cost to repair a freezer?
• Typical ice maker repair: $150–$250 Source: Fixr - How much does it cost to repair an ice maker?
• Chest freezer repair: $50–$400 Source: Fixr - How much does it cost to repair a freezer?
• Evaporator fan motor (defrost motor): $100–$440 Source: ConsumerAffairs - Cost to Repair a Freezer
• Typical freezer repair: $100–$400 Source: Fixr - How much does it cost to repair a freezer?
• Appliance repair labor: $50–$125 per hour Source: HomeGuide - How much does freezer repair cost?

When several freezer parts have failed at once, replacement is usually the more cost-efficient choice. Source: HomeGuide - How much does freezer repair cost?

Ranges are published estimates, not quotes. See the ice maker repair cost guide for more detail.

Getting Ready for the Repair

• Any light, code or message on the display
• The freezer temperature if you have a thermometer
• Whether the water dispenser still works

Local Notes for Clinton

Most ice maker calls in Clinton come down to the same handful of causes: water supply and pressure, a frozen fill tube, the water inlet valve, freezer temperature and the ice maker assembly itself.

How to Choose a Freezer and Ice Maker Technician Near Clinton

• Can you give a written estimate before ordering parts?
• Do you also repair the water dispenser and supply line?
• What guarantee do you give on parts and labor?

Maytag Ice Maker & Freezer Repair FAQs: Clinton, TN

Other Refrigeration Repair in Clinton

Maytag Ice Maker & Freezer Repair in Nearby Cities

Write down any code or light your Maytag display shows and when it appears. It helps a Clinton technician bring the right parts.