Most Maytag ice maker and freezer repairs in Bethany involve the same few systems: water supply and the inlet valve, the ice maker assembly, fans, the defrost system and the controls. Below are independent repair companies serving Bethany, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Ice Maker Technicians, Bethany OR
40 repair companies serve Bethany from within 30 miles. The rest are spread across Portland (20), Beaverton (11), and Hillsboro (6). Distances run up to about 10 miles. Nearest on the list: Appliance Service & Care Experts, around 2.0 miles out. No company within 90 miles of Bethany mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 30 rated companies in range average 4.8 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Rated 4.5 stars or higher (10+ reviews) | 18 |
|---|---|
| Appliance repair companies in range (30 mi) | 60 |
| Three nearest companies, miles away | 2.0, 2.1, 3.3 |
| Open on Saturdays (per listing) | 42 |
| Listed as refrigerator repair | 12 |
| Name refrigeration work in their listing | 12 |
The leading options for Bethany are Fuse HVAC & Appliance Repair (8.2 miles away, based in Portland, 5.0 stars from 173 reviews); Rox Services Inc (7.2 miles away, based in Beaverton, 4.9 stars from 155 reviews); A&P Appliance Parts and Service (5.3 miles away, based in Beaverton, 4.7 stars from 257 reviews, lists Saturday hours); Fix All Appliance Repair (9.2 miles away, based in Portland, 4.8 stars from 46 reviews).
Maytag Lines Technicians Work On
What a Maytag Technician Deals With
Maytag says the ice maker's water valve needs at least 20 psi to work, with a healthy supply running roughly 30 to 120 psi, and that kinks, clogs or a filter older than six months can starve it of water. Source: Maytag - Ice Maker Troubleshooting
Maytag Symptoms and First Checks
- Small or hollow cubes. Maytag points to the water line, so check it for kinks, bulges or damage and consider copper tubing. Source: Maytag - Ice Maker Troubleshooting
- Ice maker not making ice. Confirm the freezer is set to 0°F, then check that the ice maker is turned on and its shutoff arm is down. Source: Maytag - Ice Maker Troubleshooting
Testing or Resetting a Maytag Ice Maker
Maytag says to press and hold the ice maker's reset button for a few seconds if the model has one, or otherwise unplug the refrigerator for one minute, then allow a couple of hours before checking for ice. Source: Maytag Product Help - Not Making Ice - Refrigerator
Maytag Freezer Problems Worth a Service Call
- Door or lid does not seal or pops back open
- Water pooling under or inside the freezer
- Clicking, buzzing or a loud fan
What a Freezer Technician Checks
Compare with technicians who work on every brand: ice maker repair in Bethany and freezer repair in Bethany.
Care Maytag Recommends
- If dispensed ice isn't used regularly, empty and clean the ice bin and chute about every two weeks, wiping the chute and bin bottom with a warm damp cloth and drying them well. Source: Maytag Product Help - Not Dispensing Ice - Refrigerator
- Check door gaskets with the paper test: close the door on a sheet of paper and replace the seal if it slides out with little resistance. Source: Maytag - Why Is My Freezer Not Freezing?
What Maytag Ice Maker and Freezer Repairs Cost
A Maytag ice maker or freezer repair usually costs about the same as any other brand for the same part. Published ranges:
- Ice maker motor repair: $100–$350 Source: Fixr - How much does it cost to repair an ice maker?
- Deep freezer repair: $100–$400 Source: HomeGuide - How much does freezer repair cost?
- Fan replacement (evaporator or condenser): $100–$300 Source: HomeGuide - How much does freezer repair cost?
- Diagnostic fee (often waived if the repair is approved): $60–$100 per visit Source: Thumbtack - Refrigerator repair cost
Repair an ice maker that is under five years old or whose parts are affordable; replace it if the repair costs more than a whole new assembly. Source: HomeGuide - How much does an ice maker cost to repair, replace, or buy new?
Ranges are published estimates, not quotes. See the ice maker repair cost guide for more detail.
What to Have Ready for a Maytag Call
- Whether the water dispenser still works
- The brand, model and serial number from the label inside the fresh-food section
- Any light, code or message on the display
Around Bethany
Most ice maker calls in Bethany come down to the same handful of causes: water supply and pressure, a frozen fill tube, the water inlet valve, freezer temperature and the ice maker assembly itself.
Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)
In Oregon, you can check a license with the Oregon Construction Contractors Board Contractor/License Search or report a problem to the Oregon Department of Justice, Consumer Protection.
Questions to Ask a Bethany Repair Technician
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
- Can you get the ice maker assembly or valve for my model quickly?
Maytag Ice Maker & Freezer Repair FAQs: Bethany, OR
Why is my Maytag refrigerator showing a code?
Why is my ice maker making tiny cubes?
Do you work for Maytag?
Related Repair Pages for Bethany
More Maytag Ice Maker & Freezer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag refrigerator or freezer, usually on a label inside the fresh-food section or the freezer door frame. A technician who knows the model can often tell you on the phone what the first visit will involve.