Serving Brush, Colorado and nearby areas Helpline · (866) 321-1705
☎(866) 321-1705Call

Ice Maker Repair in Brush, CO

See which appliance repair companies around Brush work on refrigerator ice makers, how far away they are and how customers rate them.

Need ice maker repair in Brush?
Call our helpline to be connected with an independent ice maker technician near you.
☎(866) 321-1705
✓5 companies listed for Brush✓Independent, not a manufacturer✓Public ratings & distances

Ice makers are the most repaired part of a modern refrigerator, and the fault is often not the ice maker itself but the water or cold that feeds it. This page lists independent appliance repair companies serving Brush and the Morgan County area, with companies that mention ice maker or refrigerator work shown first.

Ice Maker Technicians Serving Brush, CO

Our data shows 5 appliance repair companies inside a 60-mile radius of Brush. Other nearby bases include Sterling (2), Greeley (2), and Bennett (1). Of those, 3 mention ice maker or refrigerator work by name. The closest is The Appliance Guys llc, about 32.4 miles away. The 5 rated companies in range average 2.9 stars. Brush is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Refrigerator & Freezer Repair
Appliance repair center
675 2nd St, Bennett, CO 80102
54.6 mi from Brush
★★★★½ 4.6 (36 reviews)
Mentions refrigeratorsSaturday hours
Appliance Repair
The Appliance Guys llc
1119 Westview Ct, Sterling, CO 80751
32.4 mi from Brush
★★★½ 3.4 (15 reviews)
Refrigerator & Freezer Repair
Sears Appliance Repair
130 Broadway St, Sterling, CO 80751
34.4 mi from Brush
★★½ 2.6 (5 reviews)
Mentions refrigeratorsSaturday hours
Appliance Repair
Hispano Maintenance
815 10th St, Greeley, CO 80631
56.9 mi from Brush
★★★ 3.0 (40 reviews)
Saturday hours
Refrigerator & Freezer Repair
Sears Appliance Repair
2800 Greeley Mall, Greeley, CO 80631
57.6 mi from Brush
★ 1.0 (6 reviews)
Mentions refrigeratorsSaturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Brush
Appliance repair companies in range (60 mi)5
Listing Saturday hours4
With 4.5+ stars and at least 10 reviews1
Listed as refrigerator repair3
Three nearest companies, miles away32.4, 34.4, 54.6
Mention refrigerators, freezers or ice makers3

First up for Brush: Appliance repair center (54.6 miles away, based in Bennett, 4.6 stars from 36 reviews, lists Saturday hours); The Appliance Guys llc (32.4 miles away, based in Sterling, 3.4 stars from 15 reviews); Sears Appliance Repair (34.4 miles away, based in Sterling, 2.6 stars from 5 reviews, lists Saturday hours); Hispano Maintenance (56.9 miles away, based in Greeley, 3.0 stars from 40 reviews, lists Saturday hours).

⚡ One call to reach a local ice maker repair company
☎(866) 321-1705

Why Ice Makers Stop Making Ice

Water inlet valveThe valve on the back of the refrigerator opens to fill the ice maker. A valve that fails or loses pressure leaves the ice maker dry or makes small, hollow cubes.
Freezer temperatureIce makers will not harvest until the mold is cold enough. A freezer running warm stops ice production long before the food starts to soften.
Ice maker assemblyThe ice maker itself has a motor, a mold heater, a sensor or feeler arm and a control. When it fails, the whole assembly is usually replaced as a unit.

Ice Maker Problems Worth a Service Call

  • Water leaking from the ice maker or dispenser
  • Ice tastes or smells off
  • Ice clumping in the bucket
  • Ice maker clicks or hums but does not fill

What Gets Fixed on a Brush Ice Maker Call

Water inlet valveThe valve on the back of the refrigerator is tested for power and flow. A weak valve makes small cubes; a stuck one can overfill and freeze the ice maker.
Dispenser and augerIf ice is made but will not come out, the auger motor, bucket, chute flap and dispenser switch are checked.
Ice maker assemblyThe ice maker motor, mold heater, sensor or arm and control are tested. A failed assembly is usually replaced as one part.

Troubleshooting first? See lg ice maker not working or whirlpool ice maker not working.

Water Lines and Leaks

Household water pressure for the ice maker should fall between 20 and 120 psi. Source: Whirlpool - Modular Ice Maker Kit Installation Instructions (W11548724)

Wine coolers and beverage centers call for a dedicated, properly grounded 115-volt, 15-amp outlet, not a GFI circuit or a switch-controlled outlet. Source: Frigidaire - Wine Cooler Use & Care Guide (A15310502)

What Ice Maker Repair Costs in Brush

An ice maker repair is usually a single part plus labor. Reference ranges from published cost guides:

A high-cost compressor or control board repair, or rising energy bills and repeat technician visits, are signs a freezer should be replaced. Source: ConsumerAffairs - Cost to Repair a Freezer

Ranges are published estimates, not quotes. See the ice maker repair cost guide for more detail.

Around Brush

Most ice maker calls in Brush come down to the same handful of causes: water supply and pressure, a frozen fill tube, the water inlet valve, freezer temperature and the ice maker assembly itself.

Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)

In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.

Questions to Ask a Brush Repair Technician

  • Will you check the water supply, filter and inlet valve before replacing the ice maker?
  • Is your company licensed where my state requires it, and insured?
  • How often do you repair your brand ice makers, including door-mounted ones?

Ice Maker Repair FAQs: Brush, CO

Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your refrigerator is still under manufacturer coverage, contact the brand first.
Why is my new ice maker not making ice yet?
New or newly repaired ice makers need time for the freezer to cool fully before the first harvest, and the first batches are often discarded. The use and care guide gives the time for your model.
Why is my ice maker making tiny cubes?
Small or hollow cubes usually mean the ice maker is not getting enough water: a clogged filter, low household pressure, a partly closed supply valve or a weak water inlet valve. A technician can test the flow and the valve.

Ice Maker and Freezer Repair by Brand in Brush

Ice Maker Repair Near Brush

A note on when the ice stopped, whether the water dispenser works and the model number in hand make any ice maker repair in Brush faster and cheaper.

Get connected with an ice maker technician near Brush
☎(866) 321-1705
☎ Call (866) 321-1705 Talk to a tech